Or use our installment options below. Available only for orders over €200.
Or get this device with an Epic Pay Monthly plan:
Spread the cost with 24 monthly instalments when you buy this device with an eligible Epic Pay Monthly contract.
5G Max Value
Transfer from Pay Monthly
24 months contract Unlimited Minutes to all National Networks Unlimited SMS 5GB DATA
24 months contract Unlimited Minutes to all National Networks Unlimited SMS 5GB DATA
€21.99/mo
€459.00 UPFRONT PAYMENT
Plan: €11.99 + Device: €10.00/mo
5G Unlimited Max
Transfer from Pay Monthly
24 months contract Unlimited Minutes to all National Networks Unlimited SMS Unlimited DATA
24 months contract Unlimited Minutes to all National Networks Unlimited SMS Unlimited DATA
€49.11/mo
€0 UPFRONT COST
Plan: €19.99 + Device: €29.13/mo
5G Unlimited Max Plus
Transfer from Pay Monthly
24 months contract Unlimited Minutes to all National Networks & 100 minutes to selected international destinations Unlimited SMS Unlimited DATA
24 months contract Unlimited Minutes to all National Networks & 100 minutes to selected international destinations Unlimited SMS Unlimited DATA
€54.11/mo
€0 UPFRONT COST
Plan: €24.99 + Device: €29.13/mo
T&Cs apply. Contact us at 77 77 06 12 or visit our store for more.
- Supporting multiple Source intelligent central control at the same time; master-slave gateway function
- Knob control with rotary use
- Proximity detection: Built-in proximity sensor for detecting human motion. Once the sensor detects near human motion, the touch screen automatically wakes up
- Physical buttons for turning off or enabling the microphone and the display with one touch
- This device must be used with the base, which can be optional with three power interfaces
—
- Power consumption : ≤15W
- Input voltage : Zigbee interface: 100 ~ 240V AC, 50/60Hz; Buspro interface: 18 –
- 28V DC; KNX interface: 21 – 30V DC
- KNX auxilary voltage : 18 – 28V DC
- Output channel : Zigbee / Buspro / KNX interface:2CH,3A/CH; Resistive load:
- ≤660W/CH; Capacitive load: ≤200W/CH
- Communication protocol : HDL LINK, WiFi 2.4G
- Main chip : RK3566
- Storage capacity : 2+16GB
- Operating frenquency : 2.4GHz, 5GHz
- Indoor communication distance (barrierfree) : ≤50m
- Operating system : Android 11
- Ethernet interface : RJ45
- Touch screen : 10-inch capacitive touchscreen, resolution: 1200*2000, with multitouch technology
- Knob : 30 levels of feedback for rotating, clicking and long-pressing;
- Turning the knob to adjust the light, curtains, volume, temperature,
- wind speed, etc.;
- Knob light : RGB light beads
- Microphone : 4 microphones
- Speaker : 1W*2
- Proximity sensor : A maximum sensing distance of 100cm, default: 50cm (can be
- modified in the settings page)
- Light Sensor : Automatically adjusts screen brightness according to light level
- Temperature & humidity sensor : Monitor the temperature and humidity of the environment
- MIC button : Enable/disable microphone
- Power button : Short press to close the display, long press to restart the device
- Type-C interface : For upgrading or temporarily powering panels
- Working temperature : -5℃ ~ 45℃
- Working relative humidity : ≤90%RH, non-condensed
- Storage temperature : -20℃ ~ 60℃
- Storage relative humidity : ≤93%RH
- Dimensions (W X H X D) : 301.3*155.2*9.8mm(Without power interface, see Figure 4)
- Net weight Source 10 : (With bracket,without power interface:1000g)
- Housing material Source 10 :Metal; Zigbee/Buspro/KNX interface:PC
- Installation : Wall box (up to 2 power interfaces installed)
- IP degree (compliant with EN 60529) : IP20
—
Specification
General
| Brand | HDL Automation |
|---|---|
| Type | Display |
Related Products
HDL Tile Series 4 Button Smart Panel Ivory White HDL-M/PT4RA.1
Available on backorder
€ 82,00
SKU:
22278










