Anycubic PLA Matte Filament Black 1Kg. Ideal Usage: Architectural models, photography props (where glare must be avoided), artistic sculptures, busts, and low-stress display prototypes.

• Soft & Elegant: Matte texture with fewer visible layer lines provides with soft touch and elegance. Macaron color enhances the prints' quality with a higher level of detail. The 3D printing matte PLA filament was neat on the roll and left the spool easily without any crossed turns. Resulting in less thread pulling and twisting, no clogging, super under-extruding.

• Accuracy & Easy Support Removal:  Anycubic 3D Printer PLA filament of 1.75mm diameter, minimum dimensional tolerance +/- 0.02mm, which makes filament outflow smoother, came out homogeneous. With a 3 years storage capacity, It has excellent mechanical properties with strong toughness and low shrinkage which makes it easier to remove the support of the prints.
• Clog Free & Bubble Free: Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother.
• Wide Compatibilty: Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75mm filament on the market.
• Filament Installation: 1.Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk.

—

• Material Type: Polylactic Acid
• Melting Point Temperature: 163 ℃ 
• Vicat Softening Temperature: 57 ℃
• Heat Deflection Temperature (0.45MPa): 54 ℃

—